Section "ServerLayout"
        Identifier  "DellM60"
        Screen   0  "Screen0" 0 0
        InputDevice "Mouse0" "CorePointer"
        InputDevice "USBMouse" "SendCoreEvents"
        InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath     "/usr/X11R6/lib/X11/rgb"
        FontPath    "/usr/X11R6/lib/X11/fonts/TrueType"
        FontPath    "/usr/X11R6/lib/X11/fonts/misc:unscaled"
        FontPath    "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
        FontPath    "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
        FontPath    "/usr/X11R6/lib/X11/fonts/Type1"
        FontPath    "/usr/X11R6/lib/X11/fonts/misc"
        FontPath    "/usr/X11R6/lib/X11/fonts/100dpi"
        FontPath    "/usr/X11R6/lib/X11/fonts/75dpi"
        FontPath    "unix/:7100"
EndSection

Section "Module"
        Load        "dbe"
        Load        "extmod"
        Load        "fbdevhw"
        Load        "glx"
        Load        "record"
        Load        "freetype"
        Load        "type1"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option      "XkbRules"        "xfree86"
        Option      "XkbModel"        "pc105"
        Option      "XkbLayout"        "us"

        # Increase standard autorepeat speed
        # Option      "AutoRepeat"        "250 30"

        # Swap control and capslock
        # Option      "XkbOptions"        "ctrl:nocaps"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "PS/2"
        Option      "Device" "/dev/psaux"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "yes"
EndSection

Section "InputDevice"
        # If the normal CorePointer mouse is not a USB mouse then
        # this input device can be used in AlwaysCore mode to let you
        # also use USB mice at the same time.
        Identifier  "USBMouse"
        Driver      "mouse"
        Option      "Protocol" "IMPS/2"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "no"
EndSection

Section "Monitor"
        Identifier  "WUXGA"
        HorizSync   28-110
        VertRefresh 43-90
        Option      "DPMS"
        Modeline    "1920x1200" 162 1920 1984 2176 2480 1200 1201 1204 1250 +hsync +vsync
EndSection

Section "Device"
        Identifier  "NVIDIA QuadroFXGo 700"
        Driver      "nvidia"
        VendorName  "NVIDIA"
        BoardName   "QuadroFXGo 700"
EndSection

Section "Screen"
        Identifier  "Screen0"
        Device      "NVIDIA QuadroFXGo 700"
        Monitor     "WUXGA"
        DefaultDepth 24

        Subsection "Display"
                Depth       24
                Modes       "1920x1200"
        EndSubsection


        Option       "NvAGP" "1"
        Option       "NoLogo" "true"
        Option       "CursorShadow" "true"

        # This twinview setup assumes a 12x10 IBM LCD 
        Option       "TwinView" "true"
        Option       "SecondMonitorHorizSync" "31.5-90"
        Option       "SecondMonitorVertRefresh" "60-85"
        Option       "MetaModes" "1280x1024,1600x1200"
        Option       "TwinViewOrientation" "LeftOf"

#        Option       "FlatPanelProperties"   "aspect-scaled"
#        Option       "RenderAccel"           "off"
#        Option       "NvEmulate" "30"
#        Option       "IgnoreEDID" "true"
#        Option       "UseEdidFreq" "true"
#        Option       "DigitalVibrance" "2"
EndSection